#!/bin/bash

# This file contains the default configuration options. These options can be
# overriden in sysinfos.

# Define this when cross-compiling to the desired target architecture. Other
# possible values are:
#   arm926t - ARM 926T little endian
#   x86 (i686)
#   x86_64 (AMD Athlon 64)
HVL_TARGET="x86"

# Installation type: server, ltsp-server or workstation.
INST_TYPE="workstation"

# Used for setting machine-specific option in CFLAGS and CPPFLAGS
MARCH_FLAGS="-march=native -fomit-frame-pointer"

# This is the number of make jobs that can be executed simultaneously.
# Normally, a value of 2 per processor gives good results.
MAKEJOBS=2

# Destination path where to install new Linux-HV system. This is usually where
# you have mounted your new LFS partition, but it can also be any directory.
# This is relevant only for stage 0 and 1.
LFS="/mnt/hvlinux"
#LFS_PARTITION="/dev/sdb7"

# Partition where bootloader resides
#BOOT_PARTITION="/dev/sdb1"

#SWAP_PARTITION="/dev/sdb2"

# /tmp is now mounted with tmpfs.
TMP_PARTITION_SIZE="8G"

# Default options when mounting partitions
# For SSD and ext4, use relatime,discard
PARTITION_MOUNT_OPTS="defaults,noatime"

# New user to create
REGUSER=""

# Define this if you want the mail addressed to the root user automatically be
# forwarded to someone else.
MAIL_ADMIN=""

# X.org driver (comment to build all drivers)
#XORG_VIDEO_DRIVER="intel"

# Sound card support: yes or no
SOUND_CARD="yes"

# Wifi support
#WIFI_SUPPORT="no"
#B43_LPPHY="yes"

# Terminal Keyboard mapping (example: us, cf)
KEYBOARD="us-acentos"

# X.org Keyboard mapping (example: us, cf)
XORG_KEYBOARD_LAYOUT="us"
XORG_KEYBOARD_VARIANT="intl"

# General network settings
#INTERFACES="eth0 eth1 wlan0" # Complex example
#INTERFACES="eth0" # Simple example
#MACHINE_NAME="machinename"
#DOMAIN="mydomain.com"
#LAN_NETWORK_MASK="192.168.0.0/24"

# Network interface card #1 settings
#BOOTPROTO[0]="dhcp" # dhcp or static or wifi

# Network interface card #2 settings
#BOOTPROTO[1]="static"
#IP_ADDRESS[1]="192.168.0.1"
#NETMASK_LENGTH[1]=24
#GATEWAY[1]="192.168.0.1"

# DNS servers addresses (not required if using DHCP)
#NAMESERVER[0]="24.200.243.250"
#NAMESERVER[1]="24.201.245.106"
#NAMESERVER[2]="24.200.243.242"

# Define to yes if you use a dynamic dns service.
USE_DYNAMIC_DNS="no"

# Define to unix (mbox) or mbx
MAILBOX_FORMAT="unix"

# Alternate port for Sendmail
SENDMAIL_PORT="25"

# Apache httpd web server support
USE_HTTPD="yes"

# Alternate port for Apache
HTTPD_PORT="80"
HTTPD_USER="www"

# Lighttpd web server support
USE_LIGHTTPD="yes"

# Define to httpd (Apache) or lighttpd
DEFAULT_WEB_SERVER="lighttpd"

# Webkit support
USE_WEBKIT="no"

# Gnash support
USE_GNASH="no"

# Samba support (default yes)
USE_SAMBA="yes"

# Set to yes to have SANE support
SANE_SUPPORT="yes"

# If your scanner is located onto a remote computer, define the following
# variable to the IP address of that remote computer.
SANE_SERVER=""

SVN_SERVER="no"

# Define this if you want to use a remote CUPS print server
#CUPS_SERVER="server.mydomain.com"

TIMEZONE="America/Montreal"

DEFAULT_EDITOR="nano"

# Uncomment this to automatically recompress all archives to bzip2 format
#PREFER_BZIP2_ARCHIVE=1

EMACS_LOCAL_SITE_LISP="/usr/local/share/emacs/site-lisp"

HV_FONTS_PATH="/usr/share/fonts"