#!/bin/bash

# This file contains the informations specific to the target system
# onto which Linux-HV will be installed

# This is the number of make jobs that can be executed
# simultaneously. Normally, a value of 2 per processor
# gives good results.
MAKEJOBS=1

# Installation type: server, ltsp-server or workstation.
INST_TYPE="workstation"

# New user to create
REGUSER="hugo"

# Destination path where to install new Linux-HV system. This is usually where
# you have mounted your new LFS partition, but it can also be any directory.
# This is relevant only for stage 0 and 1.
LFS="/mnt/stockage/hvlinux-hp-mini"

# Destination partition where to install new Linux-HV system
LFS_PARTITION="/dev/sdb7"

# Boot partition (if applicable)
BOOT_PARTITION="/dev/sdb1"

# Swap partition (if applicable)
SWAP_PARTITION="/dev/sdb2"

# Define this when cross-compiling to the desired target
# architecture. Default is x86 32-bits architecture (i686).
# arm926t - ARM 926T little endian
# x86 (i686)
# x86_64 (AMD Athlon 64)
HVL_TARGET="x86"

# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
# GCC-4.5
MARCH_FLAGS="-march=atom -mssse3 -mfpmath=sse -fomit-frame-pointer"
# GCC < 4.5
MARCH_FLAGS="-march=core2 -mtune=generic -mssse3 -mfpmath=sse -fomit-frame-pointer"

# Keyboard mapping (example: us)
KEYBOARD="us"

# Sound card support: yes or no
SOUND_CARD="yes"

# Removable media drives
CDROM="/dev/sr0"

# Set to yes to have SANE support
SANE_SUPPORT="yes"
# If your scanner is located onto a remote computer, define the following
# variable to the IP address of that remote computer.
SANE_SERVER=""

# Define this if you want to use a remote CUPS print server
#CUPS_SERVER="server.hugovil.com"

TIMEZONE="America/Montreal"

# General network settings
INTERFACES="eth0"
MACHINE_NAME="chambers64"
DOMAIN="mongol.com"
LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
# Define to yes if you have a dynamic address and you use a dynamic dns
# service.
USE_DYNAMIC_DNS="no"

# Network interface card eth0 settings (ROUTEUR/INTERNET)
BOOTPROTO[0]="dhcp"
IP_ADDRESS[0]=""
PREFIX_LENGTH[0]=""
# GATEWAY is not required if using DHCP 
GATEWAY[0]=""

# DNS servers addresses (not required if using DHCP)
NAMESERVER[0]=""

# Define this if you want the mail addressed to the root user automatically
# be forwarded to someone else
MAIL_ADMIN="hugo"

# Define to unix (mbox) or mbx
MAILBOX_FORMAT=unix

# Alternate port for Sendmail (comment this line to use the standard port 25)
SENDMAIL_PORT="25"

# Alternate port for Apache (comment this line to use the standard port 80)
HTTPD_PORT="80"
APACHE_USER="www"

# Samba support
USE_SAMBA="no"