#!/bin/sh

# This file contains the informations specific to the target system
# onto which Linux-HV will be installed

# This is the number of make jobs that can be executed
# simultaneously. Normally, a value of 2 per processor
# gives good results.
MAKEJOBS=4

# Installation type: server, ltsp-server or workstation.
INST_TYPE="server"

# New user to create
REGUSER=""

# Destination path where to install new Linux-HV system
LFS="/mnt/hvlinux"

# Destination partition where to install new Linux-HV system
LFS_PARTITION="/dev/hda10"

# Boot partition (if applicable)
BOOT_PARTITION="/dev/hda1"

# Swap partition (if applicable)
SWAP_PARTITION="/dev/hda5"

# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
MACHINE_ARCHITECTURE="pentium"

# Keyboard mapping (example: us)
KEYBOARD="us"

# Sound card support: yes or no
SOUND_CARD="no"

# Removable media drives
CDROM="/dev/hdc"
DVD="/dev/hdc"

# Define this if you want to use a remote CUPS print server
#CUPS_SERVER="server.hugovil.com"

TIMEZONE="America/Montreal"

# General network settings
INTERFACES="eth0 eth1"
MACHINE_NAME="server"
DOMAIN="hugovil.com"
LAN_NETWORK_MASK="192.168.0.0/24"
# Define to yes if you have a dynamic address and you use a dynamic dns
# service.
USE_DYNAMIC_DNS="yes"

# Network interface card #1 settings (INTERNET)
BOOTPROTO[0]="dhcp"
IP_ADDRESS[0]=""
# GATEWAY is not required if using DHCP 
GATEWAY[0]=""

# Network interface card #2 settings (LAN)
BOOTPROTO[1]="static"
IP_ADDRESS[1]="192.168.0.1"
PREFIX_LENGTH[1]=24

# DNS servers addresses (not required if using DHCP)
#NAMESERVER[0]="24.200.243.250"
#NAMESERVER[1]="24.201.245.106"
#NAMESERVER[2]="24.200.243.242"

# Define this if you want the mail addressed to the root user automatically
# be forwarded to someone else
MAIL_ADMIN="hugo"

# Define to unix (mbox) or mbx
MAILBOX_FORMAT=unix

# Alternate port for Sendmail (comment this line to use the standard port 25)
SENDMAIL_PORT="25"

# Alternate port for Apache (comment this line to use the standard port 80)
HTTPD_PORT="80"
APACHE_USER="www"

# Samba support
USE_SAMBA="no"