#!/bin/bash
-# This file contains the informations specific to the target system
-# onto which Linux-HV will be installed
+# This file contains the informations specific to the target system onto which
+# HV-Linux will be installed.
-# This is the number of make jobs that can be executed
-# simultaneously. Normally, a value of 2 per processor
-# gives good results.
-MAKEJOBS=1
-
-# Installation type: server, ltsp-server or workstation.
INST_TYPE="workstation"
-
-# New user to create
-REGUSER="hugo"
+HVL_TARGET="x86_64"
+MAKEJOBS=1
# Destination path where to install new Linux-HV system. This is usually where
# you have mounted your new LFS partition, but it can also be any directory.
# This is relevant only for stage 0 and 1.
-LFS="/mnt/hvlinux"
-
-# Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sdb7"
-
-# Boot partition (if applicable)
+LFS="/mnt/hvlinux2"
+LFS_PARTITION="/dev/sdb8"
BOOT_PARTITION="/dev/sdb1"
-
-# Swap partition (if applicable)
SWAP_PARTITION="/dev/sdb2"
-# Define this when cross-compiling to the desired target
-# architecture. Default is x86 32-bits architecture (i686).
-# arm926t - ARM 926T little endian
-# x86 (i686)
-# x86_64 (AMD Athlon 64)
-HVL_TARGET="x86_64"
-
-# Used for setting machine-specific option in CFLAGS and CPPFLAGS
-MARCH_FLAGS="-march=k8"
-
-# Keyboard mapping (example: us)
-KEYBOARD="us"
-
-# Sound card support: yes or no
-SOUND_CARD="yes"
-
-# Removable media drives
-CDROM="/dev/sr0"
-
-# Set to yes to have SANE support
-SANE_SUPPORT="yes"
-# If your scanner is located onto a remote computer, define the following
-# variable to the IP address of that remote computer.
-SANE_SERVER=""
+# New user to create
+REGUSER="hugo"
-# Define this if you want to use a remote CUPS print server
-#CUPS_SERVER="server.hugovil.com"
+# Define this if you want the mail addressed to the root user automatically be
+# forwarded to someone else.
+MAIL_ADMIN="hugo"
-TIMEZONE="America/Montreal"
+XORG_VIDEO_DRIVER="nouveau"
# General network settings
INTERFACES="eth0"
MACHINE_NAME="chambers64"
DOMAIN="mongol.com"
LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
-# Define to yes if you have a dynamic address and you use a dynamic dns
-# service.
-USE_DYNAMIC_DNS="no"
-# Network interface card eth0 settings (ROUTEUR/INTERNET)
+# Network interface card eth0 settings
BOOTPROTO[0]="dhcp"
-IP_ADDRESS[0]=""
-PREFIX_LENGTH[0]=""
-# GATEWAY is not required if using DHCP
-GATEWAY[0]=""
-
-# DNS servers addresses (not required if using DHCP)
-NAMESERVER[0]=""
-
-# Define this if you want the mail addressed to the root user automatically
-# be forwarded to someone else
-MAIL_ADMIN="hugo"
-
-# Define to unix (mbox) or mbx
-MAILBOX_FORMAT=unix
-
-# Alternate port for Sendmail (comment this line to use the standard port 25)
-SENDMAIL_PORT="25"
-
-# Alternate port for Apache (comment this line to use the standard port 80)
-HTTPD_PORT="80"
-APACHE_USER="www"
# Samba support
USE_SAMBA="no"
+
+# Override some packages
+#KERNEL="${NOUVEAU_NVIDIA_KERNEL}"