MAKEJOBS=1
# Installation type: server, ltsp-server or workstation.
-INST_TYPE="ltsp-server"
+INST_TYPE="workstation"
# New user to create
REGUSER="hugo"
-# Destination path where to install new Linux-HV system
-LFS=""
+# Destination path where to install new Linux-HV system. This is usually where
+# you have mounted your new LFS partition, but it can also be any directory.
+# This is relevant only for stage 0 and 1.
+LFS="/mnt/hvlinux"
# Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sda8"
+LFS_PARTITION="/dev/sdb7"
# Boot partition (if applicable)
-BOOT_PARTITION="/dev/sda1"
+BOOT_PARTITION="/dev/sdb1"
# Swap partition (if applicable)
-SWAP_PARTITION="/dev/sda2"
+SWAP_PARTITION="/dev/sdb2"
# Define this when cross-compiling to the desired target
# architecture. Default is x86 32-bits architecture (i686).
# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
MACHINE_ARCHITECTURE=""
-DEFAULT_EDITOR="emacs"
-
# Keyboard mapping (example: us)
KEYBOARD="us"
SOUND_CARD="yes"
# Removable media drives
-CDROM="/dev/hdc"
-DVD="/dev/hdc"
+CDROM="/dev/sr0"
# Set to yes to have SANE support
SANE_SUPPORT="yes"
TIMEZONE="America/Montreal"
# General network settings
-INTERFACES="eth0 eth1 eth2"
+INTERFACES="eth0"
# GATEWAY is not required if using DHCP
GATEWAY="192.168.1.1"
-MACHINE_NAME="server64"
-DOMAIN="hugovil.com"
-LAN_NETWORK_MASK="192.168.0.0/24" # Utilise par sane in stage3
+MACHINE_NAME="chambers64"
+DOMAIN="mongol.com"
+LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
# Define to yes if you have a dynamic address and you use a dynamic dns
# service.
USE_DYNAMIC_DNS="no"
# Network interface card eth0 settings (ROUTEUR/INTERNET)
BOOTPROTO[0]="static"
-IP_ADDRESS[0]="192.168.1.2"
+IP_ADDRESS[0]="192.168.1.102"
PREFIX_LENGTH[0]=24
-# Network interface card eth1 settings (LAN)
-BOOTPROTO[1]="static"
-IP_ADDRESS[1]="192.168.0.1"
-PREFIX_LENGTH[1]=24
-
-# Network interface card eth2 settings (MVPMC)
-BOOTPROTO[2]="static"
-IP_ADDRESS[2]="192.168.99.1"
-PREFIX_LENGTH[2]=24
-
# DNS servers addresses (not required if using DHCP)
NAMESERVER[0]="192.168.1.1"