-#!/bin/sh
+#!/bin/bash
# This file contains the informations specific to the target system
# onto which Linux-HV will be installed
MAKEJOBS=1
# Installation type: server, ltsp-server or workstation.
-INST_TYPE="ltsp-server"
+INST_TYPE="workstation"
# New user to create
REGUSER="hugo"
-# Destination path where to install new Linux-HV system
-LFS="/"
+# Destination path where to install new Linux-HV system. This is usually where
+# you have mounted your new LFS partition, but it can also be any directory.
+# After stage 1, this must be set to "".
+#LFS="/mnt/hvlinux"
+LFS=""
# Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sda10"
+LFS_PARTITION="/dev/sdb7"
# Boot partition (if applicable)
-BOOT_PARTITION="/dev/sda1"
+BOOT_PARTITION="/dev/sdb1"
# Swap partition (if applicable)
-SWAP_PARTITION="/dev/sda2"
+SWAP_PARTITION="/dev/sdb2"
+
+# Define this when cross-compiling to the desired target
+# architecture. Default is x86 32-bits architecture (i686).
+# arm926t - ARM 926T little endian
+# x86 (i686)
+# x86_64 (AMD Athlon 64)
+HVL_TARGET="x86_64"
# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
-MACHINE_ARCHITECTURE="athlon-xp"
+MACHINE_ARCHITECTURE=""
# Keyboard mapping (example: us)
-KEYBOARD="cf"
-
-HV_XF86_KEYBOARD_LAYOUT="us,ca"
-HV_XF86_KEYBOARD_VARIANT="intl,fr"
-HV_XF86_KEYBOARD_OPTIONS="grp:alt_shift_toggle"
-XF86_CARD_DRIVER="nv"
+KEYBOARD="us"
# Sound card support: yes or no
SOUND_CARD="yes"
# Removable media drives
-CDROM="/dev/hdc"
-DVD="/dev/hdc"
-
-HV_FONTS_PATH="/usr/share/fonts"
-
-# Define this if you want to use a remote CUPS print server
-#CUPS_SERVER="server.hugovil.com"
+CDROM="/dev/sr0"
-#--------------------
-# SCANNER definitions
-#--------------------
# Set to yes to have SANE support
SANE_SUPPORT="yes"
-# Define to the driver name corresponding to your scanner, if you have one
-# (see SANE documentation for drivers name). Comment out if you will be using
-# a scanner on a remote computer.
-SANE_DRIVER="epson"
# If your scanner is located onto a remote computer, define the following
# variable to the IP address of that remote computer.
SANE_SERVER=""
+# Define this if you want to use a remote CUPS print server
+#CUPS_SERVER="server.hugovil.com"
+
TIMEZONE="America/Montreal"
# General network settings
INTERFACES="eth0"
# GATEWAY is not required if using DHCP
-GATEWAY=""
-MACHINE_NAME="serveur"
-DOMAIN="hugovil.com"
-LAN_NETWORK_MASK="192.168.0.0/24"
+GATEWAY="192.168.1.1"
+MACHINE_NAME="chambers64"
+DOMAIN="mongol.com"
+LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
# Define to yes if you have a dynamic address and you use a dynamic dns
# service.
USE_DYNAMIC_DNS="no"
-# Network interface card #1 settings (INTERNET)
-BOOTPROTO[0]="dhcp"
-IP_ADDRESS[0]=""
-
-# Network interface card #2 settings (LAN)
-#BOOTPROTO[1]="static"
-#IP_ADDRESS[1]="192.168.0.1"
-#PREFIX_LENGTH[1]=24
+# Network interface card eth0 settings (ROUTEUR/INTERNET)
+BOOTPROTO[0]="static"
+IP_ADDRESS[0]="192.168.1.102"
+PREFIX_LENGTH[0]=24
# DNS servers addresses (not required if using DHCP)
-#NAMESERVER[0]="24.200.243.250"
-#NAMESERVER[1]="24.201.245.106"
-#NAMESERVER[2]="24.200.243.242"
+NAMESERVER[0]="192.168.1.1"
# Define this if you want the mail addressed to the root user automatically
# be forwarded to someone else