Add dia

[hvlinux.git] / stage2 / INSTALL

diff --git a/stage2/INSTALL b/stage2/INSTALL
index b3d9e44..01941b4 100644 (file)
--- a/stage2/INSTALL
+++ b/stage2/INSTALL
@@ -1,56 +1,32 @@
+stage2: Installing basic system software
 
-Installation instructions
--------------------------
+Installation
+------------
 
-Note: In this example, the destination partition is /dev/hda6, and
-      the sources partition is /dev/hda10.
+1. Type:
+   $> sudo make
 
-1. Create and/or format the destination partition:
-       >$ mkreiserfs /dev/hda6
+2. Type 'exit'
 
-2. Mount the partition:
-       >$ mount -t reiserfs /dev/hda6 /mnt/linux
+3. Reboot.
 
-3. In the destination partition root, create a directory that will
-   be used to mount the CD or hard disk partition containing the sources:
-       >$ cd /mnt/linux
-       >$ mkdir -p mnt/hvlinux
-
-4. Mount the sources partition:
-       >$ mount -t reiserfs /dev/hda10 /mnt/linux/mnt/hvlinux
-
-5. Copy the tools directory to the LFS (/mnt/linux) partition:
-       >$ cp -a /mnt/linux/mnt/hvlinux/tools /mnt/linux
-   This is needed only if you did not run stage1 installation
-  
-6. Modify the "/mnt/linux/mnt/hvlinux/scripts/sysinfos" file to
-   reflect your configuration.
-
-7. If you want a separate boot partition, make sure it is mounted
-   under ${LFS}/boot.
-
-8. Launch the installation of stage 2:
-       >$ /mnt/linux/mnt/hvlinux/scripts/stage2/stage2-install
-
-9. After that, compile a fresh kernel.
-
-10. type 'exit'
-
-11. You can now remove the /mnt/linux/tools directory.
-
-12. Reboot.
-
-13. When the GRUB prompt appears, install grub on the MBR with:
+4. Optional. To install GRUB, launch 'grub'. When the GRUB prompt appears,
+   install grub on the MBR with (example with boot partition on first partition
+   of first disk):
     grub> root (hd0,0)
     grub> setup (hd0)
     grub> reboot
 
-14. login as root, and create the password for the regular user:
+5. Login as root, and create the password for the regular user:
     >$ passwd reguser
 
-Post-install guide
-------------------
-    1. Compiler nouveau kernel
-    2. Ajouter une entrée à /boot/grub/menu.lst
-    3. Effacer le répertoire /tools et /cross-tools
-    4. Rouler le script stage2/misc/udev-create-persistent-net.sh
+
+Re-installation
+---------------
+
+1. You need the /tools directory in order to build stage2. If it is not
+   present, it means it was previously and automatically backed up at
+   the end of stage2 to /usr/src:
+     $> cp -a /usr/src/tools /
+
+2. Follow instructions above for stage2 installation