# Destination path where to install new Linux-HV system. This is usually where
# you have mounted your new LFS partition, but it can also be any directory.
-# After stage 1, this must be set to "".
-LFS="/mnt/hvlinux-x86_64"
+# This is relevant only for stage 0 and 1.
+LFS="/mnt/stockage/hvlinux-hp-mini"
# Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sda8"
+LFS_PARTITION="/dev/sdb7"
# Boot partition (if applicable)
-BOOT_PARTITION="/dev/sda1"
+BOOT_PARTITION="/dev/sdb1"
# Swap partition (if applicable)
-SWAP_PARTITION="/dev/sda2"
+SWAP_PARTITION="/dev/sdb2"
# Define this when cross-compiling to the desired target
# architecture. Default is x86 32-bits architecture (i686).
# arm926t - ARM 926T little endian
# x86 (i686)
# x86_64 (AMD Athlon 64)
-HVL_TARGET="x86_64"
+HVL_TARGET="x86"
# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
-MACHINE_ARCHITECTURE=""
+# GCC-4.5
+MARCH_FLAGS="-march=atom -mssse3 -mfpmath=sse -fomit-frame-pointer"
+# GCC < 4.5
+MARCH_FLAGS="-march=core2 -mtune=generic -mssse3 -mfpmath=sse -fomit-frame-pointer"
# Keyboard mapping (example: us)
KEYBOARD="us"
SOUND_CARD="yes"
# Removable media drives
-CDROM="/dev/hdc"
+CDROM="/dev/sr0"
# Set to yes to have SANE support
SANE_SUPPORT="yes"
# General network settings
INTERFACES="eth0"
-# GATEWAY is not required if using DHCP
-GATEWAY="192.168.1.1"
MACHINE_NAME="chambers64"
DOMAIN="mongol.com"
LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
USE_DYNAMIC_DNS="no"
# Network interface card eth0 settings (ROUTEUR/INTERNET)
-BOOTPROTO[0]="static"
-IP_ADDRESS[0]="192.168.1.102"
-PREFIX_LENGTH[0]=24
+BOOTPROTO[0]="dhcp"
+IP_ADDRESS[0]=""
+PREFIX_LENGTH[0]=""
+# GATEWAY is not required if using DHCP
+GATEWAY[0]=""
# DNS servers addresses (not required if using DHCP)
-NAMESERVER[0]="192.168.1.1"
+NAMESERVER[0]=""
# Define this if you want the mail addressed to the root user automatically
# be forwarded to someone else
projects / hvlinux.git / blobdiff