Ajout Makefile stage0

[hvlinux.git] / sysinfos

diff --git a/sysinfos b/sysinfos
index d9158d1..f5a38dc 100644 (file)
--- a/sysinfos
+++ b/sysinfos
@@ -16,9 +16,8 @@ REGUSER="hugo"
 
 # Destination path where to install new Linux-HV system. This is usually where
 # you have mounted your new LFS partition, but it can also be any directory.
-# After stage 1, this must be set to "".
-#LFS="/mnt/hvlinux"
-LFS=""
+# This is relevant only for stage 0 and 1.
+LFS="/mnt/stockage/hvlinux-hp-mini"
 
 # Destination partition where to install new Linux-HV system
 LFS_PARTITION="/dev/sdb7"
@@ -34,10 +33,13 @@ SWAP_PARTITION="/dev/sdb2"
 # arm926t - ARM 926T little endian
 # x86 (i686)
 # x86_64 (AMD Athlon 64)
-HVL_TARGET="x86_64"
+HVL_TARGET="x86"
 
 # Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
-MACHINE_ARCHITECTURE=""
+# GCC-4.5
+MARCH_FLAGS="-march=atom -mssse3 -mfpmath=sse -fomit-frame-pointer"
+# GCC < 4.5
+MARCH_FLAGS="-march=core2 -mtune=generic -mssse3 -mfpmath=sse -fomit-frame-pointer"
 
 # Keyboard mapping (example: us)
 KEYBOARD="us"
@@ -61,8 +63,6 @@ TIMEZONE="America/Montreal"
 
 # General network settings
 INTERFACES="eth0"
-# GATEWAY is not required if using DHCP 
-GATEWAY="192.168.1.1"
 MACHINE_NAME="chambers64"
 DOMAIN="mongol.com"
 LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
@@ -71,12 +71,14 @@ LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
 USE_DYNAMIC_DNS="no"
 
 # Network interface card eth0 settings (ROUTEUR/INTERNET)
-BOOTPROTO[0]="static"
-IP_ADDRESS[0]="192.168.1.102"
-PREFIX_LENGTH[0]=24
+BOOTPROTO[0]="dhcp"
+IP_ADDRESS[0]=""
+PREFIX_LENGTH[0]=""
+# GATEWAY is not required if using DHCP 
+GATEWAY[0]=""
 
 # DNS servers addresses (not required if using DHCP)
-NAMESERVER[0]="192.168.1.1"
+NAMESERVER[0]=""
 
 # Define this if you want the mail addressed to the root user automatically
 # be forwarded to someone else