X-Git-Url: http://gitweb.hugovil.com/?a=blobdiff_plain;f=stage2%2Fbootscripts%2Fifup;h=5ba66bb7efff66a8419a679e48ca2bd83b21e3a3;hb=6039efc819b29ad7fa890c95fda918c57ebe475c;hp=b36304601669331730f87057fe68ae9c4eead772;hpb=e8cc14e96c051666130d201fa5c60291a881e008;p=hvlinux.git diff --git a/stage2/bootscripts/ifup b/stage2/bootscripts/ifup index b363046..5ba66bb 100755 --- a/stage2/bootscripts/ifup +++ b/stage2/bootscripts/ifup @@ -6,6 +6,8 @@ DEVICE=${1} BRCTL=/usr/sbin/brctl +WPA_SUPP_OPTS="-Dnl80211 -B -s -c /etc/wpa_supplicant.conf" + # Source functions library source /etc/rc.d/init.d/functions @@ -14,6 +16,15 @@ log_script_name "$0 $*" # Load network interface card parameters source /etc/sysconfig/network/ifconfig.${DEVICE} +# Load DHCP client parameters +source /etc/sysconfig/network/dhcp-client + +# Make sure DHCP client is available. +if [ ! -x ${DHCP_PROG} ]; then + echo "Program \"${DHCP_PROG}\" is not executable." + exit ${EXIT_CODE_FAILURE} +fi + # Check that the brctl program is present and executable. check_brctl() { @@ -23,90 +34,160 @@ check_brctl() fi } -# Make sure interface is available -if ! ip link show ${DEVICE} > /dev/null 2>&1; then - echo "Interface ${1} not found" - exit ${EXIT_CODE_WARNING} -fi - -# Determining if the interface is a bridge: -if [ "x${BRIDGE}" = "xyes" ]; then - check_brctl - cmd_run_log ${BRCTL} addbr ${DEVICE} && - cmd_run_log ${BRCTL} stp ${DEVICE} off || exit 1 -fi - -# Determining if the interface is part of a bridge: -if [ -n "${BRIDGE_TO}" ]; then - check_brctl - cmd_run_log ${BRCTL} addif ${BRIDGE_TO} ${DEVICE} || exit 1 -fi - -if [ "x${BOOTPROTO}" = "xwifi" ]; then - # Bring interface up +# Bring interface up +bring_if_up() +{ link_status=$(ip link show ${DEVICE}) if [ -n "${link_status}" ]; then if ! echo "${link_status}" | grep -q UP; then cmd_run_log ip link set ${DEVICE} up fi + else + echo "Interface ${DEVICE} not found" + exit ${EXIT_CODE_WARNING} fi - if [ -f /var/run/wpa_supplicant/${DEVICE} ]; then - echo "Stopping previous wpa_supplicant" - killall wpa_supplicant - rm /var/run/wpa_supplicant/${DEVICE} + # Check if a cable is plugged for wired interface + if echo "${DEVICE}" | grep -q "eth" ; then + count=0 + while cat /sys/class/net/${DEVICE}/carrier | grep -q "0"; do + echo "Waiting for carrier to go up" + sleep 0.25 + + let count=count+1 + # 2.5 seconds delay + if [ $count -gt 10 ]; then + echo "Interface ${DEVICE}: carrier not detected (cable unplugged?)" + exit ${EXIT_CODE_WARNING} + fi + done + fi +} + +# Static IP address protocol +proto_static() +{ + cmd_run_log ip addr add ${IPADDR}/${NETMASK_LENGTH} dev ${DEVICE} \ + brd + ${IFSCOPE} || exit ${EXIT_CODE_FAILURE} + + # Bring interface up + bring_if_up + + if [ -n "${GATEWAY}" ]; then + cmd_run_log ip route add default via ${GATEWAY} || \ + exit ${EXIT_CODE_FAILURE} + fi +} + +# Obtain IP address from DHCP +proto_dhcp() +{ + # Bring interface up + bring_if_up + + cmd_run_log ${DHCP_PROG} ${DHCP_START} ${DEVICE} +} + +proto_wireless() +{ + # Bring interface up + bring_if_up + + # Check if a socket exists, meaning wpa_supplicant is running + if [ -S /var/run/wpa_supplicant/${DEVICE} ]; then + echo "wpa_supplicant already running" + + # Make sure wpa_supplicant is responding + if ! wpa_cli -i ${DEVICE} status; then + echo "Stopping unresponding wpa_supplicant" + killall wpa_supplicant + rm /var/run/wpa_supplicant/${DEVICE} + fi + fi + + # Start wpa_supplicant if it is not running + if [ ! -S /var/run/wpa_supplicant/${DEVICE} ]; then + echo "Starting wpa_supplicant" + wpa_supplicant ${WPA_SUPP_OPTS} -i ${DEVICE} fi - wpa_supplicant -B -c /etc/wpa_supplicant.conf -i wlan0 count=0 - while ! wpa_cli -i wlan0 status | grep "wpa_state=COMPLETED"; do + while ! wpa_cli -i ${DEVICE} status | grep "wpa_state=COMPLETED"; do echo "Waiting for wpa_supplicant to complete" - sleep 1 + sleep 0.25 let count=count+1 - if [ $count -gt 10 ]; then + if [ $count -gt 20 ]; then echo "wpa_supplicant failure" exit ${EXIT_CODE_WARNING} fi done - BOOTPROTO=dhcp -fi + # Obtain SSID that wpa_supplicant connected to, if applicable + SSID=$(wpa_cli -i ${DEVICE} status | egrep "^ssid=" | \ + sed 's!^ssid=\(.*\)!\1!') -if [ "x${BOOTPROTO}" = "xdhcp" ]; then - # DHCP configuration + # Convert spaces to underscores in SSID field + SSID=$(echo ${SSID} | sed -e "s!\ !_!g") + + echo "wpa_supplicant connected to network \"${SSID}\"" - # Load DHCP client parameters - source /etc/sysconfig/network/dhcp-client + if [ -z "${SSID}" ]; then + echo "Not connected to any network" + exit ${EXIT_CODE_WARNING} + fi - # Make sure no file named `/var/run/dhclient.pid' remains. - if [ -f "/var/run/dhclient.pid" ]; then - rm -f /var/run/dhclient.pid + if [ ! -d /etc/sysconfig/network/ssid ]; then + echo "Missing \"/etc/sysconfig/network/ssid\" directory" + exit ${EXIT_CODE_WARNING} fi - if [ ! -x "${DHCP_PROG}" ]; then - echo "Program \"${DHCP_PROG}\" is not executable." + # Warning: + # wpa_supplicant will connect to a given network SSID even if the case is + # incorrect (MyNetwork and MYNETWORK will work). But the ssid network file + # configuration case must match exactly what was returned by wpa_supplicant. + if [ ! -f "/etc/sysconfig/network/ssid/${SSID}" ]; then + echo "${0}: Missing network configuration file \"/etc/sysconfig/network/ssid/${SSID}\"" exit ${EXIT_CODE_FAILURE} fi - cmd_run_log ${DHCP_PROG} ${DHCP_START} ${DEVICE} -elif [ x${BOOTPROTO} = "xstatic" ]; then - # Static configuration - cmd_run_log ip addr add ${IPADDR}/${PREFIX_LENGTH} dev ${DEVICE} brd + ${IFSCOPE} && - cmd_run_log ip link set ${DEVICE} up + source "/etc/sysconfig/network/ssid/${SSID}" +} - if [ -n "${GATEWAY}" ]; then - if ip route | grep -q default; then - msg_log "Gateway already setup; skipping." - else - cmd_run_log_box "Adding default route to gateway ${GATEWAY}" \ - ip route add default via ${GATEWAY} dev ${DEVICE} - fi - fi +# Make sure interface is available +if [ ! -d /sys/class/net/${DEVICE} ]; then + echo "Interface ${DEVICE} not found" + exit ${EXIT_CODE_WARNING} +fi + +# Determining if the interface is a bridge: +if [ "x${BRIDGE}" = "xyes" ]; then + check_brctl + cmd_run_log ${BRCTL} addbr ${DEVICE} && + cmd_run_log ${BRCTL} stp ${DEVICE} off || exit 1 +fi + +# Determining if the interface is part of a bridge: +if [ -n "${BRIDGE_TO}" ]; then + check_brctl + cmd_run_log ${BRCTL} addif ${BRIDGE_TO} ${DEVICE} || exit 1 +fi + +if [ "x${BOOTPROTO}" = "xwifi" ]; then + proto_wireless + # At this point, the SSID script has been sourced, and its + # BOOTPROTO variable will contain either "static" or "dhcp", + # so configuration will continue below. +fi + +if [ "x${BOOTPROTO}" = "xdhcp" ]; then + proto_dhcp +elif [ "x${BOOTPROTO}" = "xstatic" ]; then + proto_static elif [ x${BOOTPROTO} = "xpppoe" ]; then - # PPPoE configuration cmd_run_log pppoe-start else + echo "Invalid BOOTPROTO variable" exit 1 fi