X-Git-Url: http://gitweb.hugovil.com/?a=blobdiff_plain;f=sysinfos;h=1b6c06a60e4103c03b2b3b8cc72a16041315bcb4;hb=412b89d97179a9911e948d19ee7ea1742266dd4f;hp=87a09d27086c49a473b08e3a5abcf0025efac93d;hpb=b51ceee0b72987ab3a9533c6560dd538b6332476;p=hvlinux.git

diff --git a/sysinfos b/sysinfos
index 87a09d2..1b6c06a 100644
--- a/sysinfos
+++ b/sysinfos
@@ -9,22 +9,24 @@
 MAKEJOBS=1
 
 # Installation type: server, ltsp-server or workstation.
-INST_TYPE="ltsp-server"
+INST_TYPE="workstation"
 
 # New user to create
 REGUSER="hugo"
 
-# Destination path where to install new Linux-HV system
-LFS=""
+# Destination path where to install new Linux-HV system. This is usually where
+# you have mounted your new LFS partition, but it can also be any directory.
+# This is relevant only for stage 0 and 1.
+LFS="/mnt/hvlinux"
 
 # Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sda8"
+LFS_PARTITION="/dev/sdb7"
 
 # Boot partition (if applicable)
-BOOT_PARTITION="/dev/sda1"
+BOOT_PARTITION="/dev/sdb1"
 
 # Swap partition (if applicable)
-SWAP_PARTITION="/dev/sda2"
+SWAP_PARTITION="/dev/sdb2"
 
 # Define this when cross-compiling to the desired target
 # architecture. Default is x86 32-bits architecture (i686).
@@ -36,8 +38,6 @@ HVL_TARGET="x86_64"
 # Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
 MACHINE_ARCHITECTURE=""
 
-DEFAULT_EDITOR="emacs"
-
 # Keyboard mapping (example: us)
 KEYBOARD="us"
 
@@ -45,8 +45,7 @@ KEYBOARD="us"
 SOUND_CARD="yes"
 
 # Removable media drives
-CDROM="/dev/hdc"
-DVD="/dev/hdc"
+CDROM="/dev/sr0"
 
 # Set to yes to have SANE support
 SANE_SUPPORT="yes"
@@ -60,31 +59,21 @@ SANE_SERVER=""
 TIMEZONE="America/Montreal"
 
 # General network settings
-INTERFACES="eth0 eth1 eth2"
+INTERFACES="eth0"
 # GATEWAY is not required if using DHCP 
 GATEWAY="192.168.1.1"
-MACHINE_NAME="server64"
-DOMAIN="hugovil.com"
-LAN_NETWORK_MASK="192.168.0.0/24" # Utilise par sane in stage3
+MACHINE_NAME="chambers64"
+DOMAIN="mongol.com"
+LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
 # Define to yes if you have a dynamic address and you use a dynamic dns
 # service.
 USE_DYNAMIC_DNS="no"
 
 # Network interface card eth0 settings (ROUTEUR/INTERNET)
 BOOTPROTO[0]="static"
-IP_ADDRESS[0]="192.168.1.2"
+IP_ADDRESS[0]="192.168.1.102"
 PREFIX_LENGTH[0]=24
 
-# Network interface card eth1 settings (LAN)
-BOOTPROTO[1]="static"
-IP_ADDRESS[1]="192.168.0.1"
-PREFIX_LENGTH[1]=24
-
-# Network interface card eth2 settings (MVPMC)
-BOOTPROTO[2]="static"
-IP_ADDRESS[2]="192.168.99.1"
-PREFIX_LENGTH[2]=24
-
 # DNS servers addresses (not required if using DHCP)
 NAMESERVER[0]="192.168.1.1"