X-Git-Url: http://gitweb.hugovil.com/?a=blobdiff_plain;f=sysinfos;h=3a93cc4345361674d7bc769fbe26890896321156;hb=afdcc2624aec2f5aaaf00aa211455ba54eaf0703;hp=d1a74806badb16b040b1e6687f2c7ef98c93a7bb;hpb=f63a78e04ec65397472cda88061558f4e3a30fb2;p=hvlinux.git

diff --git a/sysinfos b/sysinfos
index d1a7480..3a93cc4 100644
--- a/sysinfos
+++ b/sysinfos
@@ -15,10 +15,10 @@ INST_TYPE="ltsp-server"
 REGUSER="hugo"
 
 # Destination path where to install new Linux-HV system
-LFS="/"
+LFS=""
 
 # Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sda10"
+LFS_PARTITION="/dev/sda8"
 
 # Boot partition (if applicable)
 BOOT_PARTITION="/dev/sda1"
@@ -26,68 +26,60 @@ BOOT_PARTITION="/dev/sda1"
 # Swap partition (if applicable)
 SWAP_PARTITION="/dev/sda2"
 
+# Define this when cross-compiling to the desired target
+# architecture. Default is x86 32-bits architecture (i686).
+# x86 (i686)
+# x86_64 (AMD Athlon 64)
+HVL_TARGET="x86"
+
 # Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
 MACHINE_ARCHITECTURE="athlon-xp"
 
-# Keyboard mapping (example: us)
-KEYBOARD="cf"
+DEFAULT_EDITOR="emacs"
 
-HV_XF86_KEYBOARD_LAYOUT="us,ca"
-HV_XF86_KEYBOARD_VARIANT="intl,fr"
-HV_XF86_KEYBOARD_OPTIONS="grp:alt_shift_toggle"
-XF86_CARD_DRIVER="nv"
+# Keyboard mapping (example: us)
+KEYBOARD="us"
 
 # Sound card support: yes or no
-SOUND_CARD="yes"
+SOUND_CARD="no"
 
 # Removable media drives
 CDROM="/dev/hdc"
 DVD="/dev/hdc"
 
-HV_FONTS_PATH="/usr/share/fonts"
-
 # Define this if you want to use a remote CUPS print server
 #CUPS_SERVER="server.hugovil.com"
 
-#--------------------
-# SCANNER definitions
-#--------------------
-# Set to yes to have SANE support
-SANE_SUPPORT="yes"
-# Define to the driver name corresponding to your scanner, if you have one
-# (see SANE documentation for drivers name).  Comment out if you will be using
-# a scanner on a remote computer.
-SANE_DRIVER="epson"
-# If your scanner is located onto a remote computer, define the following
-# variable to the IP address of that remote computer.
-SANE_SERVER=""
-
 TIMEZONE="America/Montreal"
 
 # General network settings
-INTERFACES="eth0"
+INTERFACES="eth0 eth1 eth2"
 # GATEWAY is not required if using DHCP 
-GATEWAY=""
-MACHINE_NAME="serveur"
+GATEWAY="192.168.1.1"
+MACHINE_NAME="server64"
 DOMAIN="hugovil.com"
-LAN_NETWORK_MASK="192.168.0.0/24"
+LAN_NETWORK_MASK="192.168.0.0/24" # Utilise par sane in stage3
 # Define to yes if you have a dynamic address and you use a dynamic dns
 # service.
 USE_DYNAMIC_DNS="no"
 
-# Network interface card #1 settings (INTERNET)
-BOOTPROTO[0]="dhcp"
-IP_ADDRESS[0]=""
+# Network interface card eth0 settings (ROUTEUR/INTERNET)
+BOOTPROTO[0]="static"
+IP_ADDRESS[0]="192.168.1.2"
+PREFIX_LENGTH[0]=24
+
+# Network interface card eth1 settings (LAN)
+BOOTPROTO[1]="static"
+IP_ADDRESS[1]="192.168.0.1"
+PREFIX_LENGTH[1]=24
 
-# Network interface card #2 settings (LAN)
-#BOOTPROTO[1]="static"
-#IP_ADDRESS[1]="192.168.0.1"
-#PREFIX_LENGTH[1]=24
+# Network interface card eth2 settings (MVPMC)
+BOOTPROTO[2]="static"
+IP_ADDRESS[2]="192.168.99.1"
+PREFIX_LENGTH[2]=24
 
 # DNS servers addresses (not required if using DHCP)
-#NAMESERVER[0]="24.200.243.250"
-#NAMESERVER[1]="24.201.245.106"
-#NAMESERVER[2]="24.200.243.242"
+NAMESERVER[0]="192.168.1.1"
 
 # Define this if you want the mail addressed to the root user automatically
 # be forwarded to someone else