X-Git-Url: http://gitweb.hugovil.com/?a=blobdiff_plain;f=sysinfos;h=4607dfb770e9310cf074248b75f08ebdd36ab667;hb=7f1a3e5d69d0b1d64619604c30243e0070dc09ad;hp=0d752cdd70cb858a25b9e97303bd9b7ab3936211;hpb=97b938a7a341fe0d45ba4f93ce9e785b2bdc182a;p=hvlinux.git

diff --git a/sysinfos b/sysinfos
index 0d752cd..4607dfb 100644
--- a/sysinfos
+++ b/sysinfos
@@ -16,17 +16,17 @@ REGUSER="hugo"
 
 # Destination path where to install new Linux-HV system. This is usually where
 # you have mounted your new LFS partition, but it can also be any directory.
-# After stage 1, this must be set to "".
-LFS="/mnt/hvlinux-x86_64"
+# This is relevant only for stage 0 and 1.
+LFS="/mnt/hvlinux"
 
 # Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sda8"
+LFS_PARTITION="/dev/sdb7"
 
 # Boot partition (if applicable)
-BOOT_PARTITION="/dev/sda1"
+BOOT_PARTITION="/dev/sdb1"
 
 # Swap partition (if applicable)
-SWAP_PARTITION="/dev/sda2"
+SWAP_PARTITION="/dev/sdb2"
 
 # Define this when cross-compiling to the desired target
 # architecture. Default is x86 32-bits architecture (i686).
@@ -38,8 +38,6 @@ HVL_TARGET="x86_64"
 # Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
 MACHINE_ARCHITECTURE=""
 
-DEFAULT_EDITOR="emacs"
-
 # Keyboard mapping (example: us)
 KEYBOARD="us"
 
@@ -47,7 +45,7 @@ KEYBOARD="us"
 SOUND_CARD="yes"
 
 # Removable media drives
-CDROM="/dev/hdc"
+CDROM="/dev/sr0"
 
 # Set to yes to have SANE support
 SANE_SUPPORT="yes"
@@ -62,8 +60,6 @@ TIMEZONE="America/Montreal"
 
 # General network settings
 INTERFACES="eth0"
-# GATEWAY is not required if using DHCP 
-GATEWAY="192.168.1.1"
 MACHINE_NAME="chambers64"
 DOMAIN="mongol.com"
 LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
@@ -72,12 +68,14 @@ LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
 USE_DYNAMIC_DNS="no"
 
 # Network interface card eth0 settings (ROUTEUR/INTERNET)
-BOOTPROTO[0]="static"
-IP_ADDRESS[0]="192.168.1.102"
-PREFIX_LENGTH[0]=24
+BOOTPROTO[0]="dhcp"
+IP_ADDRESS[0]=""
+PREFIX_LENGTH[0]=""
+# GATEWAY is not required if using DHCP 
+GATEWAY[0]=""
 
 # DNS servers addresses (not required if using DHCP)
-NAMESERVER[0]="192.168.1.1"
+NAMESERVER[0]=""
 
 # Define this if you want the mail addressed to the root user automatically
 # be forwarded to someone else