X-Git-Url: http://gitweb.hugovil.com/?a=blobdiff_plain;f=sysinfos;h=5125c050997d2a348c7f9a62fd05d65774cf1591;hb=be41960e19c9daee738916df4138559a262ca34a;hp=d1a74806badb16b040b1e6687f2c7ef98c93a7bb;hpb=f63a78e04ec65397472cda88061558f4e3a30fb2;p=hvlinux.git

diff --git a/sysinfos b/sysinfos
index d1a7480..5125c05 100644
--- a/sysinfos
+++ b/sysinfos
@@ -18,7 +18,7 @@ REGUSER="hugo"
 LFS="/"
 
 # Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sda10"
+LFS_PARTITION="/dev/sda8"
 
 # Boot partition (if applicable)
 BOOT_PARTITION="/dev/sda1"
@@ -26,68 +26,48 @@ BOOT_PARTITION="/dev/sda1"
 # Swap partition (if applicable)
 SWAP_PARTITION="/dev/sda2"
 
+# Define this when cross-compiling to the desired target
+# architecture. Default is x86 32-bits architecture (i686).
+# x86 (i686)
+# x86_64 (AMD Athlon 64)
+HVL_TARGET="x86"
+
 # Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
 MACHINE_ARCHITECTURE="athlon-xp"
 
-# Keyboard mapping (example: us)
-KEYBOARD="cf"
+DEFAULT_EDITOR="emacs"
 
-HV_XF86_KEYBOARD_LAYOUT="us,ca"
-HV_XF86_KEYBOARD_VARIANT="intl,fr"
-HV_XF86_KEYBOARD_OPTIONS="grp:alt_shift_toggle"
-XF86_CARD_DRIVER="nv"
+# Keyboard mapping (example: us)
+KEYBOARD="us"
 
 # Sound card support: yes or no
-SOUND_CARD="yes"
+SOUND_CARD="no"
 
 # Removable media drives
 CDROM="/dev/hdc"
 DVD="/dev/hdc"
 
-HV_FONTS_PATH="/usr/share/fonts"
-
 # Define this if you want to use a remote CUPS print server
 #CUPS_SERVER="server.hugovil.com"
 
-#--------------------
-# SCANNER definitions
-#--------------------
-# Set to yes to have SANE support
-SANE_SUPPORT="yes"
-# Define to the driver name corresponding to your scanner, if you have one
-# (see SANE documentation for drivers name).  Comment out if you will be using
-# a scanner on a remote computer.
-SANE_DRIVER="epson"
-# If your scanner is located onto a remote computer, define the following
-# variable to the IP address of that remote computer.
-SANE_SERVER=""
-
 TIMEZONE="America/Montreal"
 
 # General network settings
-INTERFACES="eth0"
+INTERFACES="eth0 eth1 eth2"
 # GATEWAY is not required if using DHCP 
-GATEWAY=""
-MACHINE_NAME="serveur"
+GATEWAY="192.168.1.1"
+MACHINE_NAME="server64"
 DOMAIN="hugovil.com"
-LAN_NETWORK_MASK="192.168.0.0/24"
+LAN_NETWORK_MASK="192.168.0.0/24" # Utilise par sane in stage3
 # Define to yes if you have a dynamic address and you use a dynamic dns
 # service.
 USE_DYNAMIC_DNS="no"
 
-# Network interface card #1 settings (INTERNET)
+# Network interface card eth0 settings
 BOOTPROTO[0]="dhcp"
-IP_ADDRESS[0]=""
-
-# Network interface card #2 settings (LAN)
-#BOOTPROTO[1]="static"
-#IP_ADDRESS[1]="192.168.0.1"
-#PREFIX_LENGTH[1]=24
 
 # DNS servers addresses (not required if using DHCP)
-#NAMESERVER[0]="24.200.243.250"
-#NAMESERVER[1]="24.201.245.106"
-#NAMESERVER[2]="24.200.243.242"
+#NAMESERVER[0]="192.168.1.1"
 
 # Define this if you want the mail addressed to the root user automatically
 # be forwarded to someone else