X-Git-Url: http://gitweb.hugovil.com/?a=blobdiff_plain;f=sysinfos;h=6c2cee6134e80f433d2c158406deaf122e0772ad;hb=81b44564a13cf0bf396398a274d8346206c09865;hp=94b7ed5625b53a908f714ebe4d92b2faf708f1f3;hpb=07bb6026cea496a885d217cc5f505ca3896d78b8;p=hvlinux.git

diff --git a/sysinfos b/sysinfos
index 94b7ed5..6c2cee6 100644
--- a/sysinfos
+++ b/sysinfos
@@ -9,13 +9,15 @@
 MAKEJOBS=1
 
 # Installation type: server, ltsp-server or workstation.
-INST_TYPE="server"
+INST_TYPE="workstation"
 
 # New user to create
 REGUSER="hugo"
 
-# Destination path where to install new Linux-HV system
-LFS="/opt/toolchains/arm926ejs/clfs"
+# Destination path where to install new Linux-HV system. This is usually where
+# you have mounted your new LFS partition, but it can also be any directory.
+# After stage 1, this must be set to "".
+LFS="/mnt/hvlinux-x86_64"
 
 # Destination partition where to install new Linux-HV system
 LFS_PARTITION="/dev/sda8"
@@ -31,22 +33,25 @@ SWAP_PARTITION="/dev/sda2"
 # arm926t - ARM 926T little endian
 # x86 (i686)
 # x86_64 (AMD Athlon 64)
-HVL_TARGET="arm926t"
+HVL_TARGET="x86_64"
 
 # Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
 MACHINE_ARCHITECTURE=""
 
-DEFAULT_EDITOR="emacs"
-
 # Keyboard mapping (example: us)
 KEYBOARD="us"
 
 # Sound card support: yes or no
-SOUND_CARD="no"
+SOUND_CARD="yes"
 
 # Removable media drives
 CDROM="/dev/hdc"
-DVD="/dev/hdc"
+
+# Set to yes to have SANE support
+SANE_SUPPORT="yes"
+# If your scanner is located onto a remote computer, define the following
+# variable to the IP address of that remote computer.
+SANE_SERVER=""
 
 # Define this if you want to use a remote CUPS print server
 #CUPS_SERVER="server.hugovil.com"
@@ -54,31 +59,21 @@ DVD="/dev/hdc"
 TIMEZONE="America/Montreal"
 
 # General network settings
-INTERFACES="eth0 eth1 eth2"
+INTERFACES="eth0"
 # GATEWAY is not required if using DHCP 
 GATEWAY="192.168.1.1"
-MACHINE_NAME="server64"
-DOMAIN="hugovil.com"
-LAN_NETWORK_MASK="192.168.0.0/24" # Utilise par sane in stage3
+MACHINE_NAME="chambers64"
+DOMAIN="mongol.com"
+LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
 # Define to yes if you have a dynamic address and you use a dynamic dns
 # service.
 USE_DYNAMIC_DNS="no"
 
 # Network interface card eth0 settings (ROUTEUR/INTERNET)
 BOOTPROTO[0]="static"
-IP_ADDRESS[0]="192.168.1.2"
+IP_ADDRESS[0]="192.168.1.102"
 PREFIX_LENGTH[0]=24
 
-# Network interface card eth1 settings (LAN)
-BOOTPROTO[1]="static"
-IP_ADDRESS[1]="192.168.0.1"
-PREFIX_LENGTH[1]=24
-
-# Network interface card eth2 settings (MVPMC)
-BOOTPROTO[2]="static"
-IP_ADDRESS[2]="192.168.99.1"
-PREFIX_LENGTH[2]=24
-
 # DNS servers addresses (not required if using DHCP)
 NAMESERVER[0]="192.168.1.1"