-#!/bin/bash
-
-# This file contains the informations specific to the target system
-# onto which Linux-HV will be installed
-
-# This is the number of make jobs that can be executed
-# simultaneously. Normally, a value of 2 per processor
-# gives good results.
-MAKEJOBS=1
-
-# Installation type: server, ltsp-server or workstation.
-INST_TYPE="workstation"
-
-# New user to create
-REGUSER="hugo"
-
-# Destination path where to install new Linux-HV system. This is usually where
-# you have mounted your new LFS partition, but it can also be any directory.
-# This is relevant only for stage 0 and 1.
-LFS="/mnt/stockage/hvlinux-hp-mini"
-
-# Destination partition where to install new Linux-HV system
-LFS_PARTITION="/dev/sda3"
-
-# Boot partition (if applicable)
-BOOT_PARTITION="/dev/sda1"
-
-# Swap partition (if applicable)
-#SWAP_PARTITION="/dev/sdb2"
-
-# Define this when cross-compiling to the desired target
-# architecture. Default is x86 32-bits architecture (i686).
-# arm926t - ARM 926T little endian
-# x86 (i686)
-# x86_64 (AMD Athlon 64)
-HVL_TARGET="x86"
-
-# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
-# GCC-4.5
-MARCH_FLAGS="-march=atom -mssse3 -mfpmath=sse -fomit-frame-pointer"
-# GCC < 4.5
-MARCH_FLAGS="-march=core2 -mtune=generic -mssse3 -mfpmath=sse -fomit-frame-pointer"
-
-# Keyboard mapping (example: us)
-KEYBOARD="us"
-
-# Sound card support: yes or no
-SOUND_CARD="yes"
-
-# Removable media drives. Comment if your system doesn't have one.
-#CDROM="/dev/sr0"
-
-# Set to yes to have SANE support
-SANE_SUPPORT="yes"
-# If your scanner is located onto a remote computer, define the following
-# variable to the IP address of that remote computer.
-SANE_SERVER=""
-
-# Define this if you want to use a remote CUPS print server
-#CUPS_SERVER="server.hugovil.com"
-
-TIMEZONE="America/Montreal"
-
-# General network settings
-INTERFACES="eth0"
-MACHINE_NAME="chambers64"
-DOMAIN="mongol.com"
-LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3
-# Define to yes if you have a dynamic address and you use a dynamic dns
-# service.
-USE_DYNAMIC_DNS="no"
-
-# Network interface card eth0 settings (ROUTEUR/INTERNET)
-BOOTPROTO[0]="dhcp"
-IP_ADDRESS[0]=""
-PREFIX_LENGTH[0]=""
-# GATEWAY is not required if using DHCP
-GATEWAY[0]=""
-
-# DNS servers addresses (not required if using DHCP)
-NAMESERVER[0]=""
-
-# Define this if you want the mail addressed to the root user automatically
-# be forwarded to someone else
-MAIL_ADMIN="hugo"
-
-# Define to unix (mbox) or mbx
-MAILBOX_FORMAT=unix
-
-# Alternate port for Sendmail (comment this line to use the standard port 25)
-SENDMAIL_PORT="25"
-
-# Alternate port for Apache (comment this line to use the standard port 80)
-HTTPD_PORT="80"
-APACHE_USER="www"
-
-# Samba support
-USE_SAMBA="no"