+#!/bin/sh
+
+# This file contains the informations specific to the target system
+# onto which Linux-HV will be installed
+
+# This is the number of make jobs that can be executed
+# simultaneously. Normally, a value of 2 per processor
+# gives good results.
+MAKEJOBS=1
+
+# Installation type: server, ltsp-server or workstation.
+INST_TYPE="ltsp-server"
+
+# New user to create
+REGUSER="hugo"
+
+# Destination path where to install new Linux-HV system
+LFS="/"
+
+# Destination partition where to install new Linux-HV system
+LFS_PARTITION="/dev/sda10"
+
+# Boot partition (if applicable)
+BOOT_PARTITION="/dev/sda1"
+
+# Swap partition (if applicable)
+SWAP_PARTITION="/dev/sda2"
+
+# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS
+MACHINE_ARCHITECTURE="athlon-xp"
+
+# Keyboard mapping (example: us)
+KEYBOARD="cf"
+
+HV_XF86_KEYBOARD_LAYOUT="us,ca"
+HV_XF86_KEYBOARD_VARIANT="intl,fr"
+HV_XF86_KEYBOARD_OPTIONS="grp:alt_shift_toggle"
+XF86_CARD_DRIVER="nv"
+
+# Sound card support: yes or no
+SOUND_CARD="yes"
+
+# Removable media drives
+CDROM="/dev/hdc"
+DVD="/dev/hdc"
+
+HV_FONTS_PATH="/usr/share/fonts"
+
+# Define this if you want to use a remote CUPS print server
+#CUPS_SERVER="server.hugovil.com"
+
+#--------------------
+# SCANNER definitions
+#--------------------
+# Set to yes to have SANE support
+SANE_SUPPORT="yes"
+# Define to the driver name corresponding to your scanner, if you have one
+# (see SANE documentation for drivers name). Comment out if you will be using
+# a scanner on a remote computer.
+SANE_DRIVER="epson"
+# If your scanner is located onto a remote computer, define the following
+# variable to the IP address of that remote computer.
+SANE_SERVER=""
+
+TIMEZONE="America/Montreal"
+
+# General network settings
+INTERFACES="eth0"
+# GATEWAY is not required if using DHCP
+GATEWAY=""
+MACHINE_NAME="serveur"
+DOMAIN="hugovil.com"
+LAN_NETWORK_MASK="192.168.0.0/24"
+# Define to yes if you have a dynamic address and you use a dynamic dns
+# service.
+USE_DYNAMIC_DNS="no"
+
+# Network interface card #1 settings (INTERNET)
+BOOTPROTO[0]="dhcp"
+IP_ADDRESS[0]=""
+
+# Network interface card #2 settings (LAN)
+#BOOTPROTO[1]="static"
+#IP_ADDRESS[1]="192.168.0.1"
+#PREFIX_LENGTH[1]=24
+
+# DNS servers addresses (not required if using DHCP)
+#NAMESERVER[0]="24.200.243.250"
+#NAMESERVER[1]="24.201.245.106"
+#NAMESERVER[2]="24.200.243.242"
+
+# Define this if you want the mail addressed to the root user automatically
+# be forwarded to someone else
+MAIL_ADMIN="hugo"
+
+# Define to unix (mbox) or mbx
+MAILBOX_FORMAT=unix
+
+# Alternate port for Sendmail (comment this line to use the standard port 25)
+SENDMAIL_PORT="25"
+
+# Alternate port for Apache (comment this line to use the standard port 80)
+HTTPD_PORT="80"
+APACHE_USER="www"
+
+# Samba support
+USE_SAMBA="no"