From: gobo72 Date: Sat, 5 Mar 2011 00:16:57 +0000 (+0000) Subject: Enlevé sysinfos de subversion X-Git-Url: http://gitweb.hugovil.com/?a=commitdiff_plain;h=bc6140954484d75f3fd1056ff7d2d76523d9bb39;p=hvlinux.git Enlevé sysinfos de subversion --- diff --git a/config/sysinfos b/config/sysinfos deleted file mode 100644 index a60b7c9..0000000 --- a/config/sysinfos +++ /dev/null @@ -1,98 +0,0 @@ -#!/bin/bash - -# This file contains the informations specific to the target system -# onto which Linux-HV will be installed - -# This is the number of make jobs that can be executed -# simultaneously. Normally, a value of 2 per processor -# gives good results. -MAKEJOBS=1 - -# Installation type: server, ltsp-server or workstation. -INST_TYPE="workstation" - -# New user to create -REGUSER="hugo" - -# Destination path where to install new Linux-HV system. This is usually where -# you have mounted your new LFS partition, but it can also be any directory. -# This is relevant only for stage 0 and 1. -LFS="/mnt/stockage/hvlinux-hp-mini" - -# Destination partition where to install new Linux-HV system -LFS_PARTITION="/dev/sda3" - -# Boot partition (if applicable) -BOOT_PARTITION="/dev/sda1" - -# Swap partition (if applicable) -#SWAP_PARTITION="/dev/sdb2" - -# Define this when cross-compiling to the desired target -# architecture. Default is x86 32-bits architecture (i686). -# arm926t - ARM 926T little endian -# x86 (i686) -# x86_64 (AMD Athlon 64) -HVL_TARGET="x86" - -# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS -# GCC-4.5 -MARCH_FLAGS="-march=atom -mssse3 -mfpmath=sse -fomit-frame-pointer" -# GCC < 4.5 -MARCH_FLAGS="-march=core2 -mtune=generic -mssse3 -mfpmath=sse -fomit-frame-pointer" - -# Keyboard mapping (example: us) -KEYBOARD="us" - -# Sound card support: yes or no -SOUND_CARD="yes" - -# Removable media drives. Comment if your system doesn't have one. -#CDROM="/dev/sr0" - -# Set to yes to have SANE support -SANE_SUPPORT="yes" -# If your scanner is located onto a remote computer, define the following -# variable to the IP address of that remote computer. -SANE_SERVER="" - -# Define this if you want to use a remote CUPS print server -#CUPS_SERVER="server.hugovil.com" - -TIMEZONE="America/Montreal" - -# General network settings -INTERFACES="eth0" -MACHINE_NAME="chambers64" -DOMAIN="mongol.com" -LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3 -# Define to yes if you have a dynamic address and you use a dynamic dns -# service. -USE_DYNAMIC_DNS="no" - -# Network interface card eth0 settings (ROUTEUR/INTERNET) -BOOTPROTO[0]="dhcp" -IP_ADDRESS[0]="" -PREFIX_LENGTH[0]="" -# GATEWAY is not required if using DHCP -GATEWAY[0]="" - -# DNS servers addresses (not required if using DHCP) -NAMESERVER[0]="" - -# Define this if you want the mail addressed to the root user automatically -# be forwarded to someone else -MAIL_ADMIN="hugo" - -# Define to unix (mbox) or mbx -MAILBOX_FORMAT=unix - -# Alternate port for Sendmail (comment this line to use the standard port 25) -SENDMAIL_PORT="25" - -# Alternate port for Apache (comment this line to use the standard port 80) -HTTPD_PORT="80" -APACHE_USER="www" - -# Samba support -USE_SAMBA="no" diff --git a/config/sysinfos.amd64 b/config/sysinfos.amd64 new file mode 100644 index 0000000..4607dfb --- /dev/null +++ b/config/sysinfos.amd64 @@ -0,0 +1,95 @@ +#!/bin/bash + +# This file contains the informations specific to the target system +# onto which Linux-HV will be installed + +# This is the number of make jobs that can be executed +# simultaneously. Normally, a value of 2 per processor +# gives good results. +MAKEJOBS=1 + +# Installation type: server, ltsp-server or workstation. +INST_TYPE="workstation" + +# New user to create +REGUSER="hugo" + +# Destination path where to install new Linux-HV system. This is usually where +# you have mounted your new LFS partition, but it can also be any directory. +# This is relevant only for stage 0 and 1. +LFS="/mnt/hvlinux" + +# Destination partition where to install new Linux-HV system +LFS_PARTITION="/dev/sdb7" + +# Boot partition (if applicable) +BOOT_PARTITION="/dev/sdb1" + +# Swap partition (if applicable) +SWAP_PARTITION="/dev/sdb2" + +# Define this when cross-compiling to the desired target +# architecture. Default is x86 32-bits architecture (i686). +# arm926t - ARM 926T little endian +# x86 (i686) +# x86_64 (AMD Athlon 64) +HVL_TARGET="x86_64" + +# Used for setting '-march=xxx' option in CFLAGS and CPPFLAGS +MACHINE_ARCHITECTURE="" + +# Keyboard mapping (example: us) +KEYBOARD="us" + +# Sound card support: yes or no +SOUND_CARD="yes" + +# Removable media drives +CDROM="/dev/sr0" + +# Set to yes to have SANE support +SANE_SUPPORT="yes" +# If your scanner is located onto a remote computer, define the following +# variable to the IP address of that remote computer. +SANE_SERVER="" + +# Define this if you want to use a remote CUPS print server +#CUPS_SERVER="server.hugovil.com" + +TIMEZONE="America/Montreal" + +# General network settings +INTERFACES="eth0" +MACHINE_NAME="chambers64" +DOMAIN="mongol.com" +LAN_NETWORK_MASK="192.168.1.0/24" # Utilise par sane in stage3 +# Define to yes if you have a dynamic address and you use a dynamic dns +# service. +USE_DYNAMIC_DNS="no" + +# Network interface card eth0 settings (ROUTEUR/INTERNET) +BOOTPROTO[0]="dhcp" +IP_ADDRESS[0]="" +PREFIX_LENGTH[0]="" +# GATEWAY is not required if using DHCP +GATEWAY[0]="" + +# DNS servers addresses (not required if using DHCP) +NAMESERVER[0]="" + +# Define this if you want the mail addressed to the root user automatically +# be forwarded to someone else +MAIL_ADMIN="hugo" + +# Define to unix (mbox) or mbx +MAILBOX_FORMAT=unix + +# Alternate port for Sendmail (comment this line to use the standard port 25) +SENDMAIL_PORT="25" + +# Alternate port for Apache (comment this line to use the standard port 80) +HTTPD_PORT="80" +APACHE_USER="www" + +# Samba support +USE_SAMBA="no"